CAMBRIDGE Dimmer Insert with Toggle Lever, Brass.
€99.69
Available, delivery time: 2-5 days
Product information "CAMBRIDGE Dimmer Insert with Toggle Lever, Brass."
This dimmer insert with toggle lever is suitable for almost all dimmable light sources and is simple to operate.
Universal dimmer and light switch in one
For 230 V light sources: dimmable LED bulbs 2–150 W, trailing-edge dimming; dimmable halogen lamps, dimmable energy-saving lamps and incandescent bulbs.
No neutral conductor required.
Adjusting the brightness / dimming: press and hold the toggle lever until the desired brightness is reached, then release.
Switching the light on at the last selected brightness: briefly press the toggle lever.
Switching the light on directly at maximum brightness: briefly press the toggle lever twice.
One device can be installed centrally in each wall box, or two devices can be installed side by side.
Technical data
- Suitable for R and C loads
- Operating voltage: 230 V AC
- Frequency: 50–60 Hz
- Installation type: flush-mounted
- Standby power consumption: 0.34 W
- Incandescent/halogen lamp load: 150 W
- LED light sources: 150 W, trailing-edge dimming
- With temperature and overcurrent shutdown, plus short-circuit protection
Important: For installation in wall boxes with a minimum depth of 45 mm. The required mounting frames are automatically supplied when ordering the corresponding front plate from the Cambridge or YORK collection.
Included
Push-button insert, consisting of mechanism and toggle lever
230 V universal dimmer
Please note: Please order the matching Cambridge or YORK front plate separately.
Login
Passt zu:
This high-quality LED insert is designed for integration into rocker light switches. It is compatible with the ROHDE+ROHDE Cambridge and YORK collections. A subtle point of light appears at the top of the rocker, gently accentuating the switch while providing reliable orientation in low-light conditions. The refined illumination complements the architectural intent of contemporary switch designs without drawing undue attention. Direct connection to 230 V Very low energy consumption Long-lasting and replaceable Neutral conductor required A design-focused enhancement for high-end installations where functionality and aesthetics integrate seamlessly.
This high-quality LED insert is designed for integration into rocker light switches. It is compatible with the ROHDE+ROHDE Cambridge and YORK collections. A subtle point of light appears at the top of the rocker, gently accentuating the switch while providing reliable orientation in low-light conditions. The refined illumination complements the architectural intent of contemporary switch designs without drawing undue attention. Direct connection to 230 V Very low energy consumption Long-lasting and replaceable Neutral conductor required A design-focused enhancement for high-end installations where functionality and aesthetics integrate seamlessly.