Yes, you can order from us even if your billing address is outside Germany.
However, the delivery address must currently be in Germany.
This restriction is due to the different national regulations in EU member states regarding the disposal and recycling of electrical equipment and packaging materials. We are working hard to find a solution.
Yes, with a valid VAT ID and a delivery address in Germany 🇩🇪 or the Netherlands 🇳🇱.
Shipping to Austria should soon be possible with a valid VAT number. We are already working flat out on this.
The reason for the current restrictions is the varying national regulations on the disposal of electrical equipment and packaging materials.
Modern illuminated design light switch in RAL colour glass optic vertical with 2 chrome toggle levers. YORK
Illuminated designer light switch with a Dark Chrome toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a clean, contemporary and distinctly architectural character. The dark, polished metal creates a precise accent against the coloured front without dominating the overall design. Depending on the chosen RAL shade, the result can range from understated and almost monochrome to bold, contrasting and expressive. RAL colours as a precise design tool for architecture and interiors The internationally established RAL colour system provides an unambiguous way of specifying colours, making it particularly useful for architectural, interior and furniture design. Walls, doors, windows, furniture, kitchen fronts, metal components and many other elements can be coordinated using a specific RAL colour reference. With YORK, this principle can be extended right down to the light switch. The front plate can be individually reverse-painted in virtually any required RAL shade. Rather than being added to the interior as an afterthought, the switch can therefore be considered as an integral part of the colour scheme from the initial planning stage. Metallic RAL shades are excluded from this version. Due to their special pigmentation, they cannot be offered with this reverse-painted finish. From understated whites, greys and natural tones to rich blues, greens and reds or striking accent colours, the RAL system offers extensive possibilities for individual residential and architectural schemes. Dark Chrome – dark metal as a contemporary accent The solid metal toggles in Dark Chrome give this version of YORK a particularly modern and minimalist appearance. Their dark, polished finish is more understated than conventional bright chrome, while still providing a clearly defined contrast against the coloured front. Against lighter RAL shades, the dark toggle creates a crisp, graphic detail. Combined with anthracite, dark blue, deep green or other darker colours, it can create an almost monochrome appearance in which differences in surface finish and reflected light provide the visual interest. Dark Chrome is therefore particularly well suited to minimalist interiors, contemporary kitchens, high-quality fitted furniture and architectural schemes featuring dark metal, glass or stone elements. RAL colour hand-applied behind the transparent front The distinctive appearance of the YORK front plate is created by its special painting technique. The selected RAL shade is not applied to the visible surface of the switch. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL colour in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This creates a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary directly painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent front and does not come into direct contact with hands or objects during everyday use. Dark Chrome toggle with optional point of light A characteristic feature of the YORK collection is the option of adding a subtle point of light to the toggle. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The dark chrome finish creates a particularly distinctive lighting effect. The small point of light stands out precisely against the dark metal surface and, together with the individually selected RAL colour, forms a carefully considered design detail. Against darker front plates, the point of light can subtly break up the minimalist appearance, while on lighter or more intense RAL colours it provides an additional graphic accent. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect designed for everyday use ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection for its YORK front plates. The material combines the elegant appearance of a glass surface with excellent durability and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a durable surface and a solid metal toggle makes YORK a designer light switch created both for everyday use and for demanding architectural applications. Blend into the colour scheme or create a deliberate contrast One of the key advantages of an individually produced RAL front plate is the precision it offers when planning a colour scheme. If, for example, a wall, door, piece of furniture or kitchen front is already specified in a particular RAL colour, the YORK front plate can be ordered to coordinate with it. The light switch can therefore blend almost seamlessly into its surroundings. Alternatively, a second RAL shade can be deliberately chosen to make the switch stand out as an architectural feature in its own right. The Dark Chrome toggle adds further design possibilities: it can create a strong contrast against a light-coloured front or combine with darker RAL shades for a particularly understated overall appearance. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with Dark Chrome Front plate can be reverse-painted in virtually any required RAL shade Metallic colours cannot be ordered Precise coordination with architecture, furniture, kitchens and individual interior schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK is suitable for both individual wall boxes and combinations of several light switches and sockets. In multiple configurations, the individual wall boxes are covered by a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the room colour later – keep the existing switch mechanism The visible YORK front plate can be replaced independently of the already installed switch mechanism. If the colour scheme of a room changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in RAL colour glass optic with 3 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in RAL colour glass optic with 2 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated switch-socket combo with 1 brass toggle lever in RAL colour glass optic. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in RAL colour glass optic with 1 brass toggle lever. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated horizontal switch-socket combo with 1 brass toggle lever in RAL colour glass optic. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in RAL colour glass optic vertical with 2 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and a front plate in your chosen RAL colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate can be reverse-painted in virtually any RAL shade to order, allowing the light switch to be precisely coordinated with wall colours, furniture, fitted joinery, kitchen fronts or other architectural elements. The combination of an individual RAL colour, brilliant glass effect and solid brass toggle brings together clean, contemporary design and the warmth of a metallic accent. Depending on the chosen shade, the switch can blend almost seamlessly with its surroundings or be used deliberately as a contrasting design detail. RAL colours for precisely coordinated interior schemes The RAL colour system provides a particularly practical basis for architectural and interior design planning. Wall finishes, furniture surfaces, doors, windows, kitchens, metal components and many other elements are frequently specified using a particular RAL colour reference. For YORK, the front plate can therefore be individually produced in virtually any required RAL shade. This allows the light switch to be incorporated precisely into an existing colour scheme or coordinated with other architectural and interior elements from the initial planning stage. Metallic RAL shades are excluded. Due to their special pigmentation, they cannot be offered for this version. From understated natural tones and rich colours to classic greys and beiges or bold accent shades, the extensive RAL palette offers a wide range of possibilities for both private interiors and demanding architectural projects. Brass as a warm contrast to your chosen RAL colour The solid toggles with a high-quality brass finish create a deliberate contrast with the individually selected front colour. Combined with cooler greys, blues or greens in particular, the warm metal introduces an interesting interplay between colour and material. With beige, cream, red or earthy shades, the brass can blend more harmoniously into the overall scheme. The character of the switch can therefore change considerably depending on the chosen RAL colour – from crisp and architectural to warm and inviting. It can also be coordinated with brass taps, lighting, furniture fittings or other metallic details within the room. RAL colour hand-applied behind the transparent front The selected colour is not applied to the visible surface of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen RAL shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This technique gives the selected shade a distinctive visual depth and brilliant glass effect that differs significantly from an ordinary painted plastic surface. At the same time, the actual paint layer remains protected behind the transparent material and is not exposed to direct contact during everyday use. Illuminated brass toggle If desired, the brass toggle can be fitted with a subtle point of light. Depending on how it is wired, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the illumination changes with the selected RAL colour. Against darker front plates, the point of light stands out particularly clearly, while on lighter shades it blends more subtly into the overall design. Combined with the brass finish, it creates a small but carefully considered lighting detail that also makes the switch easier to locate in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. YORK therefore combines the premium visual effect of a colour reverse-painted behind a transparent front with the durability required of a light switch designed for everyday use. An individual RAL colour instead of a standard finish A front plate specified in a particular RAL colour allows YORK to be integrated with exceptional precision into an existing design scheme. This is particularly useful where other surfaces within the room have already been manufactured or painted to a specific RAL reference. The light switch can either blend discreetly into the wall surface or be deliberately specified in a second RAL shade to create a contrasting accent. In addition to RAL, the YORK collection is also available in numerous other colour systems and colour collections. Advantages of YORK in an individual RAL colour with brass Front plate can be individually reverse-painted in virtually any RAL shade Metallic colours cannot be ordered Particularly suitable for architectural, furniture and interior design schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Installation of YORK toggle light switches YORK can be used with individual wall boxes as well as in multiple configurations. Several light switches or sockets can be combined beneath a single continuous front plate. The wall boxes can be arranged horizontally or vertically. Where several boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected RAL colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – keep the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If a room is redesigned or given a different RAL colour at a later date, there is therefore no need to replace the complete light switch. A new front plate in the required RAL shade can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 3 chrome toggle levers. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 3 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 2 chrome toggle levers. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 2 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated switch-socket combo with 1 chrome toggle lever in NCS colour glass optic. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated switch-socket combo with 1 brass toggle lever in NCS colour glass optic. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 1 chrome toggle lever. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic with 1 brass toggle lever. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated horizontal switch-socket combo with 1 chrome toggle lever in NCS colour glass optic. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated horizontal switch-socket combo with 1 brass toggle lever in NCS colour glass optic. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic vertical with 2 chrome toggle levers. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a particularly clean, architectural appearance. Depending on the colour selected, the switch can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. The dark metal toggle adds a precise accent without dominating the minimalist overall appearance. NCS colours for sophisticated architectural and colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system ideal for architecture, interior design, furniture planning and projects where different surfaces need to be precisely coordinated in terms of colour. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS shade, allowing it to be carefully coordinated with other surfaces and materials within the room. This is particularly useful in projects where walls, doors, furniture, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can repeat this shade and become an integral part of the overall architectural concept. From light and understated nuances to natural greys and earthy tones or intense colours, the extensive NCS system offers an exceptionally broad range of design possibilities. Dark Chrome as a precise accent against the NCS colour The solid metal toggles with their high-quality Dark Chrome finish give this YORK version its distinctive character. Unlike traditional bright chrome, Dark Chrome has a considerably more understated appearance and reflects light in a darker, more subtle way. Against light or vibrant NCS colours, the dark toggle creates a clearly defined graphic contrast. With anthracite, grey, blue, green or other dark shades, by contrast, an almost monochromatic appearance can be achieved, allowing the toggle and front plate to blend more closely together visually. Dark Chrome is therefore particularly well suited to modern architecture, minimalist interiors and rooms that already feature black, anthracite or dark metallic details. It can also be coordinated with lighting, door hardware, taps, cabinet handles or other dark metal finishes within the room. Individual NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied directly to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is then viewed through the transparent front material. This creates a distinctive sense of optical depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front material. During everyday use, it therefore does not come into direct contact with hands or other objects. The combination of the individual NCS colour, crystal-clear surface and dark, glossy metal toggle gives this YORK version a particularly precise and sophisticated appearance. Dark Chrome toggle with optional point of light The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design detail. The small point of light is particularly striking against the dark metal surface of the toggle. Together with the individually selected NCS colour, it creates an interesting interplay of colour, dark metal and light. The effect of the illumination also changes depending on the selected front colour. Against darker surfaces, the point of light stands out particularly clearly, while lighter NCS colours create a different overall visual effect. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. The combination of protected reverse painting, a resistant surface and robust front material helps preserve the refined appearance of the light switch over time. Individual NCS colour as part of the architecture A front plate defined by an NCS colour allows YORK to be deliberately integrated into existing or newly planned colour and material schemes. The front can, for example, repeat the same NCS shade as the wall, allowing it to blend almost seamlessly into the surrounding surface. Alternatively, a second colour can be deliberately selected to turn the light switch into a small architectural accent. The combination with Dark Chrome creates particularly interesting possibilities: while the individual NCS colour defines the appearance of the surface, the dark metal toggle introduces a clear, graphic accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with Dark Chrome Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Carefully coordinated with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or the colour scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in NCS colour glass optic vertical with 2 brass toggle levers. YORK
Illuminated designer light switch with a brass toggle and an individually selected colour from the NCS colour system from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order in virtually any chosen NCS shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry, kitchen fronts, materials and other elements of an individual interior scheme. The combination of an individual NCS colour, brilliant glass effect and solid brass toggle brings together precisely defined colour with a warm metallic accent. Depending on the NCS shade selected, YORK can be designed to blend almost tone-on-tone with its surroundings or deliberately used as a contrasting design feature. NCS colours for precisely coordinated colour schemes The Natural Colour System (NCS) provides a particularly detailed and systematic way of defining colours. This makes the NCS colour system especially useful for architecture, interior design, furniture planning and sophisticated colour schemes. With YORK, this precise approach to colour planning can be extended right down to the light switch. The front plate is individually reverse-painted in the selected NCS colour, allowing it to be carefully coordinated with other surfaces and shades within the room. This is particularly useful in projects where walls, furniture, doors, fitted cabinetry or other design elements have already been specified using a particular NCS colour code. The light switch can then be integrated with exceptional precision into the existing scheme. From light, muted and natural shades to intense colours and deliberately chosen accent tones, the extensive NCS colour system offers an exceptionally broad range of design possibilities. Brass as a warm contrast to the individual NCS colour The solid toggles with a high-quality brass finish add a warm metallic accent to the individually coloured front plate. When combined with cool greys, blues and greens in particular, brass creates an appealing contrast between the clean expanse of colour and the warm metal tone. With beige, red, terracotta and other earthy shades, by contrast, the brass can blend more harmoniously into the overall design. The character of the switch therefore changes significantly depending on the NCS colour selected – from understated and architectural to warm, decorative and inviting. It can also be coordinated with other brass details within the room, such as taps, lighting, door handles, cabinet hardware or decorative features. NCS colour hand-applied behind the transparent front With YORK, the selected NCS colour is not applied to the visible face of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the chosen NCS shade in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front material. This technique creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted finish does not come into direct contact with hands or other objects. The interaction between the NCS colour and the crystal-clear surface gives the front plate a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The appearance of the light point changes according to the NCS colour selected. Against darker front plates it stands out particularly clearly, while on lighter or softer shades it blends more subtly into the overall design. Together with the brass, this creates a carefully balanced interplay of colour, metal and light. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour layer is protected behind the transparent surface, YORK combines a high-quality reverse-painted finish with a durable and easy-care visible front. NCS colour as part of the interior design An individually selected NCS colour allows the light switch to be incorporated with exceptional precision into an existing or newly planned colour scheme. The front plate can, for example, be finished to complement the wall colour, repeat an NCS shade used on furniture or fitted cabinetry, or deliberately introduce a second colour as an accent. In this way, the light switch becomes more than a purely technical component and forms a carefully considered part of the interior architecture. The combination with brass provides additional design possibilities. While the NCS colour defines the overall appearance of the surface, the warm metal toggle adds a precise and sophisticated accent. In addition to NCS, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in an individual NCS colour with brass Front plate individually reverse-painted in a chosen NCS colour Particularly suitable for precise colour planning in architecture and interior design Accurate coordination with wall colours, furniture, fitted cabinetry and other design elements Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Other individual colour systems and colour collections are also available for YORK Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected NCS colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour later – retain the existing switch mechanism The visible YORK front plate and the installed switch mechanism are separate components. If the room is redesigned or given a different colour scheme at a later date, there is therefore no need to replace the complete light switch. A new front plate in another chosen NCS colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.
Modern illuminated design light switch in Designers Guild colour glass optic with 1 brass toggle lever. YORK
Illuminated designer light switch with a brass toggle and an individually selected Designers Guild colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order using a colour from Designers Guild, allowing the light switch to be carefully coordinated with wall colours, fabrics, wallpapers, furniture and other elements of an individual interior scheme. The combination of a Designers Guild colour, brilliant glass effect and solid brass toggle creates an expressive interplay of colour, material and surface. The warm character of the brass complements many shades beautifully and gives the switch a refined, decorative quality. Depending on the colour selected, YORK can either blend discreetly into the interior or be deliberately used as a contrasting design feature. YORK is a designer light switch collection by ROHDE+ROHDE. The light switches and front plates are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. Colours from Designers Guild are used to create the individually finished front plates. Designers Guild colours for individual interior schemes Colour plays a central role in the design of sophisticated interiors. With a YORK front plate individually finished in a Designers Guild colour, this approach to colour can be extended right down to the light switch. This is particularly appealing where Designers Guild wall colours, wallpapers, fabrics, upholstered furniture or other decorative elements are already being used within a room. The light switch can be coordinated with the existing scheme, becoming a carefully considered part of the interior rather than simply a functional necessity. The front plate does not necessarily have to blend as discreetly as possible into the wall. A deliberately selected contrasting colour can equally turn the switch into a small but distinctive architectural or decorative feature. Combining colour with brass creates further design possibilities. Rich blues, greens or violets can form a striking contrast with the warm metal, while pinks, reds, beiges and natural shades can create a softer, more harmonious overall effect when paired with brass. Brass toggle as a warm metallic accent The solid toggle with a high-quality brass finish provides a deliberate counterpoint to the coloured front plate. Its warm metallic tone stands out against the brilliant colour surface and gives the switch a distinctive material quality. Particularly when combined with intense or characteristic Designers Guild shades, an interesting balance is created: the colour defines the overall surface, while the brass toggle introduces a precise metallic accent. The switch can also be coordinated with other brass details in the room, such as lighting, taps, door handles, furniture fittings or decorative accessories. This makes YORK suitable for contemporary and expressive interiors as well as more classic or eclectic schemes. Designers Guild colour hand-applied behind the transparent front The selected colour is not applied to the visible face of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted using the chosen Designers Guild colour in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This distinctive technique creates rich visual depth and a brilliant glass effect that differs considerably from a conventional directly painted surface. At the same time, the actual paint layer remains protected behind the transparent material and does not come into direct contact with hands or objects during everyday use. The interaction between the colour and the crystal-clear surface can alter the visual character of the original shade, giving it a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical connection, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. Together with the coloured front plate, this creates a carefully balanced interplay of colour, brass and light. Against darker shades, the point of light stands out particularly clearly, while on lighter or softer colours it becomes a more understated part of the design. In darkness, the small point of light becomes a characteristic feature of the switch while also making it easier to locate. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For YORK, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. As the paint layer is positioned behind the transparent front, YORK combines the distinctive visual effect of reverse painting with a durable and easy-care visible surface. Colour as part of the interior design Using a Designers Guild colour allows the light switch to become an intentional part of a wider interior scheme. Particularly in rooms where colours, fabrics, wallpapers and furniture have been carefully coordinated, a light switch need not remain merely a technical element. The front plate can, for example, be selected to coordinate with the wall colour, pick up a shade found in a fabric or wallpaper, or deliberately introduce a new colour accent into the room. Combined with the brass toggle, this creates a design element that can work equally well in colourful interiors and more restrained schemes. In addition to colours from Designers Guild, the YORK collection is available in numerous other colour collections and colour systems. Advantages of YORK in a Designers Guild colour with brass Front plate individually reverse-painted using a colour from Designers Guild Light switches and front plates manufactured by ROHDE+ROHDE Particularly suitable for coordinating with wall colours, wallpapers, fabrics and sophisticated interior schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy YORK also available in other individual colour collections and colour systems Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted using the selected Designers Guild colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour scheme later – retain the existing switch mechanism The visible YORK front plate and the switch mechanism installed in the wall are separate components. If the wall colour or entire interior scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only. Trademark notice YORK is a collection by ROHDE+ROHDE. The light switches, front plates and frames offered here are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. In this product description, Designers Guild refers solely to the colours and shades used for the individual colour finish.
Modern illuminated design light switch in Designers Guild colour glass optic with 1 chrome toggle lever. YORK
Illuminated designer light switch with a Dark Chrome toggle and an individually selected Designers Guild colour from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order using a colour from Designers Guild. This allows the light switch to be precisely coordinated with wall colours, wallpapers, fabrics, furniture and other elements of a sophisticated interior scheme. The combination of an individual Designers Guild colour, brilliant glass effect and solid Dark Chrome toggle gives YORK a clean, contemporary aesthetic. The dark, polished metal creates a distinctive contrast with the coloured front while appearing more understated than conventional bright chrome. Depending on the colour selected, the result can range from a subtle, almost monochromatic appearance to a deliberately contrasting design. YORK is a designer light switch collection by ROHDE+ROHDE. The light switches and front plates are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. Colours from Designers Guild are used to create the individually finished front plates. Designers Guild colours as part of individual interior schemes In sophisticated interior design, colour is not considered in isolation but planned in combination with materials, surfaces, furniture and fabrics. With a YORK front plate in an individually selected Designers Guild colour, this approach to design can be extended right down to the light switch. This is particularly appealing in rooms where Designers Guild wall colours, wallpapers, fabrics, upholstered furniture or other decorative elements are already being used. The front plate can pick up an existing shade and deliberately integrate the light switch into the overall design of the room. YORK can equally be used as a carefully considered colour accent. Rather than allowing the switch to blend as discreetly as possible into the wall, a contrasting Designers Guild colour can be selected to turn it into a distinctive architectural detail. The dark toggles offer additional design possibilities. Against light, pastel or intense colours, they create a clearly defined graphic accent. Combined with darker shades of blue, green, grey or violet, they can produce a particularly calm, almost monochromatic effect. Dark Chrome – understated metal with a distinctive presence The solid metal toggle in a high-quality Dark Chrome finish defines the character of this YORK version. Its dark, polished surface reflects light far more subtly than conventional bright chrome, making it particularly suitable for contemporary and minimalist interiors. Against a light or strongly coloured front, it creates a precise contrast between colour and metal. With darker Designers Guild shades, the toggle can visually merge more closely with the front plate. The differing surfaces and reflections of light still create a subtle sense of visual tension. Dark Chrome can also be coordinated beautifully with other dark metal finishes in the room, such as lighting, door furniture, taps, cabinet handles or black and anthracite architectural elements. This makes the design particularly suitable for minimalist architecture, contemporary kitchens, sophisticated living spaces and individually designed interiors. Designers Guild colour hand-applied behind the transparent front With YORK, the selected colour is not applied to the visible surface of the front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the selected Designers Guild colour in the ROHDE+ROHDE studio. The shade is then viewed through the transparent front material. This creates a distinctive sense of visual depth and a brilliant glass effect that differs significantly from a conventionally painted surface. At the same time, the actual paint layer remains protected behind the transparent front. During everyday use, the painted surface therefore does not come into direct contact with hands or other objects. The interaction between the Designers Guild colour and the crystal-clear surface can influence the visual appearance of the original shade, giving it a distinctive and particularly refined character. Illuminated Dark Chrome toggle The Dark Chrome toggle can optionally be fitted with a subtle point of light. Depending on the electrical installation, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. The small point of light is particularly precise against the dark metal surface. Together with the individually coloured front, it creates an interesting interplay of colour, dark metal and light. Its visual effect changes according to the selected shade: against dark front plates, the point of light can create a particularly clear accent, while with lighter or more intense colours it becomes part of a different overall composition. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear glass effect with excellent durability For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material is designed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. Because the colour is protected behind the transparent surface, YORK combines the distinctive depth of a reverse-painted finish with a durable and easy-care visible front. A light switch designed to complement the interior An individually produced Designers Guild front plate offers numerous possibilities for incorporating the light switch into an existing interior scheme. The front can, for example, match the wall colour, pick up a shade from a wallpaper or fabric, or deliberately create a contrasting accent against other surfaces in the room. In this way, the light switch becomes more than a purely functional component and forms a small but carefully considered part of the interior architecture. The combination with Dark Chrome particularly supports this approach. While the coloured front defines the overall surface effect, the dark metal toggle adds a precise and contemporary accent. In addition to colours from Designers Guild, the YORK collection is available in numerous other colour collections and colour systems. Advantages of YORK in a Designers Guild colour with Dark Chrome Front plate individually reverse-painted using a colour from Designers Guild Light switches and front plates manufactured by ROHDE+ROHDE Ideal for coordinating with wall colours, wallpapers, fabrics, furniture and individual interior schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich visual colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality Dark Chrome finish Dark Chrome toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy YORK also available in other individual colour collections and colour systems Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted using the selected Designers Guild colour Switch mechanism with Dark Chrome toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the interior colour later – retain the existing switch mechanism The visible YORK front plate can be replaced independently of the switch mechanism already installed in the wall. If the room is redesigned at a later date, the wall colour changes or the entire interior is given a new look, there is therefore no need to replace the complete light switch. A new front plate in another colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only. Trademark notice YORK is a collection by ROHDE+ROHDE. The light switches, front plates and frames offered here are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. In this product description, Designers Guild refers solely to the colours and shades used for the individual colour finish.
Light switch white 3-gang bronze toggle illuminated glass-effect modern vertical. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch white double bronze toggle illuminated glass-effect modern vertical. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch white 1-gang bronze toggle illuminated with 1 socket. Glass-effect modern vertical. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch white 1-gang bronze toggle illuminated glass-effect modern vertical. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch white 1-gang bronze toggle illuminated with 1 socket. Glass-effect modern horizontal. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch white 2 bronze toggles illuminated glass-effect modern vertical. YORK
Illuminated YORK designer light switch with Antique Bronze toggle levers. The clean white front plate with its frameless glass-effect finish is paired with solid metal toggle levers featuring a distinctive Antique Bronze finish. The warm, dark bronze tone creates a striking accent against the light-coloured front plate and gives the switch an elegant sense of depth. Combined with the crystal-clear acrylic glass, it creates a premium design with a sophisticated architectural character. The YORK version in Antique Bronze offers a contemporary interpretation of the classic toggle switch. Clean surfaces and understated proportions are combined with the warm character of the bronze-coloured metal finish. This allows the light switch to complement contemporary and timeless interiors as well as sophisticated schemes featuring classic or natural materials. High-quality switching technology completes the refined, minimalist design. For an additional functional and decorative feature, the toggle levers can optionally be illuminated. The subtle point of light can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design accent. In hallways, bedrooms and living areas, the illumination makes the switch easier to locate while also creating a discreet lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. In addition to its range of metal finishes, the YORK Collection offers an exceptional choice of more than 1,001 bespoke colours for the front plates. Each front plate can be individually reverse-painted by hand in the customer's chosen colour. The extensive selection includes original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours. This makes it possible to coordinate light switches and sockets precisely with wall colours, furniture, surfaces and the overall colour scheme of an interior. The special reverse-painted finish produces intense, brilliant colour and exceptional visual depth. The coloured layer is protected by crystal-clear, high-end acrylic glass with a scratch-resistant surface treatment. The material also features an integrated UV filter, providing lasting protection against light-induced colour changes. The acrylic glass used is eleven times more resistant to breakage than conventional glass, combining a premium appearance with exceptional durability. ROHDE+ROHDE designer light switches and sockets are therefore designed to retain their high-quality appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch mechanisms with Antique Bronze toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and the distinctive Antique Bronze finish creates a unique character, making this version a striking design detail for contemporary, classic and timeless interiors. Advantages of YORK Designer Toggle Switches in Antique Bronze Front plates available in more than 1,001 bespoke colours Original shades from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS colours Front plates individually reverse-painted by hand Brilliant colour depth and a premium frameless glass-effect finish High-end acrylic glass with a scratch-resistant surface treatment Eleven times more resistant to breakage than conventional glass Integrated UV filter for lasting protection of the coloured finish Solid metal toggle levers with a distinctive Antique Bronze finish Optional toggle lever illumination with a subtle point of light Safety and quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for contemporary, classic and exclusive interior schemes Installing YORK Toggle Light Switches YORK front plates allow multiple wall boxes to be covered by a single continuous front plate, whether arranged horizontally or vertically. For this configuration, the wall boxes must be installed with the standard 71 mm centre-to-centre spacing. A minimum wall-box depth of 45 mm is also required. For secure installation, the switch mechanisms are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) YORK Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Antique Bronze toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Required installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options With the extensive range of bespoke colours available, the YORK front plate can be individually tailored to complement virtually any interior scheme. If wall colours or interior finishes are changed at a later date, the switch can easily be adapted: only the front plate needs to be replaced, while the existing switch mechanism remains installed in the wall. As there is no need to interfere with the electrical installation, a qualified electrician is not required simply to replace the front plate.
Light switch black 3-gang bronze toggles illuminated. Modern glass-effect YORK
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Light switch black 2-gang bronze toggles illuminated. Modern glass-effect YORK
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Switch and socket combination, black. 1 bronze toggle switch, 1 socket. Glass-effect, YORK.
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Light switch black 1-gang bronze toggle illuminated. Modern glass-effect YORK
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Switch and socket combination, black. 1 bronze toggle switch, 1 socket. Glass-effect, YORK.
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Light switch black 2-gang bronze toggles illuminated. Vertical. Modern glass-effect YORK
Illuminated designer light switch with a bronze toggle and black reverse-painted glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black is combined with the warm, distinctive character of bronze. The solid metal toggles are individually hand-finished with a brushed lacquer effect, giving each switch a subtly crafted character of its own. Together with the frameless black front and its brilliant glass effect, this creates a premium design feature that combines contemporary simplicity with the character of a traditionally finished metal surface. While the black front appears calm and precise, the bronze introduces a warmer and more expressive material quality. It is this contrast that makes the combination particularly suited to sophisticated homes, individual architectural projects and contemporary, classic or eclectic interiors. Bronze with a hand-applied brushed lacquer finish A defining feature of this YORK version is its solid bronze-finish toggles. Their distinctive texture and appearance are created by a brushed lacquer finish applied by hand. Unlike a perfectly uniform industrial finish, this handcrafted treatment gives the surface a more individual and lively character. Subtle variations in appearance are part of the design and emphasise the individual nature of the toggles. The bronze has a warm yet understated quality. Combined with the deep black front, it creates an intriguing contrast that is less graphic than black with chrome and more restrained than a combination with polished brass. YORK can therefore be incorporated particularly effectively into sophisticated material schemes featuring dark woods, natural stone, textured wall finishes, premium fabrics or other bronze-coloured details. Deep black created by reverse painting The front plate also owes its distinctive appearance to a carefully considered production process. The black colour is not applied to the visible face. Instead, the reverse of the crystal-clear acrylic glass is hand-painted black in the ROHDE+ROHDE studio. Viewed through the transparent material, the black develops a remarkable sense of visual depth. The surface remains clear and brilliant, while the actual paint layer is protected on the reverse. This reverse-painting technique produces a distinctly different effect from an ordinary black plastic or conventionally painted surface. The result is a calm, intense expanse of colour with an elegant, premium glass character. Hand-finished bronze meets contemporary glass design Much of the appeal of this YORK version comes from the deliberate contrast between its surfaces. On one side is the precise, crystal-clear, deep black front; on the other, the handcrafted finish of the bronze toggle. This gives the switch a contemporary appearance without making it feel cold. At the same time, the bronze introduces the character of a traditional material without turning YORK into a conventional retro switch. This combination makes the design remarkably versatile. In minimalist interiors, the bronze can introduce a warm accent, while in more classical settings it creates a contemporary link between traditional materials and clean, understated design. Bronze toggle with a subtle point of light The bronze version can also be equipped with YORK's characteristic toggle illumination. A small point of light within the toggle provides discreet, precise illumination after dark. Depending on the electrical installation, the light can be used as an orientation light, indicator light or permanently illuminated design feature. Against the black front, the effect is particularly distinctive: the dark surface visually recedes while the point of light and bronze finish become more prominent. The hand-finished surface also responds to incident light differently from a uniformly polished metal surface, further enhancing the individual character of the material. If illumination is not required, the supplied 230 V LED insert can simply be omitted during installation. Designed for lasting quality The YORK front is made from high-quality crystal-clear acrylic glass, combining the elegant appearance of glass with excellent durability for everyday use. The material features effective scratch protection and is eleven times more impact-resistant than conventional glass. The black paint layer remains protected on the reverse of the transparent material. In addition, the acrylic glass incorporates a UV filter, which helps protect the colour finish behind it against long-term changes caused by exposure to light. In this way, YORK combines the distinctive visual depth of a reverse-painted surface with the practical requirements of a light switch designed for everyday use. Black is just one of many possibilities The black version shown here forms part of the extensive colour concept available within the YORK collection. Front plates can be individually reverse-painted in more than 1,001 bespoke colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows light switches and sockets to be coordinated with wall colours, furniture, kitchens, fitted joinery or individual architectural colour schemes. Within this extensive range, the combination of a black front and bronze toggle is a particularly warm and characterful choice. What makes YORK Black + Bronze distinctive Black front plate with premium reverse-painted finish Hand-painted in the ROHDE+ROHDE studio Exceptional depth of black created by the transparent front Frameless, minimalist glass effect Solid metal toggles with a distinctive bronze finish Bronze surface individually hand-finished with a brushed lacquer effect Subtle individual surface character created by the handcrafted finishing process Toggles optionally illuminated with a discreet point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the reverse-painted finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plates also available in a wide range of bespoke colours Installation in single or multiple wall boxes YORK can be used as an individual light switch or in combinations comprising several switches and sockets. In multiple configurations, a single continuous front plate covers wall boxes positioned alongside or above one another. For these arrangements, the wall boxes must be installed at the standard 71 mm centre-to-centre spacing. Both horizontal and vertical configurations are possible. The wall boxes must be at least 45 mm deep. The switch mechanisms are securely screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate with black reverse-painted finish Switch mechanism with hand-finished bronze toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert where included in the selected product configuration Mounting materials, excluding wall boxes Illustrated installation instructions A new colour scheme? Keep the existing switch mechanism With YORK, the visible front plate and the electrical switch mechanism are separate components. This means the appearance of the light switch can be changed at a later date without replacing the already installed mechanism. If, for example, the colour scheme of a room changes, a new YORK front plate in the desired colour can be ordered separately and fitted in place of the black front. The switch mechanism and wiring remain unchanged in the wall. No electrician is required when replacing the front plate only.
Light switch in Farrow Ball colour 3 toggles Bronze Antique illuminated. Glass-effect. YORK
Illuminated designer light switch. With a hand-antiqued Bronze Antique toggle and an individually selected Farrow Ball colour. From the YORK collection by ROHDE+ROHDE. The frameless front plate is made to order and individually reverse-painted in the chosen Farrow Ball shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry and other elements of an individually designed interior. The combination of a bespoke Farrow Ball colour, brilliant glass effect and antiqued bronze toggle gives this YORK version a distinctive character of its own. While the clean, frameless front has a modern, minimalist appearance, the hand-finished bronze introduces a warm and subtly varied metal surface. It is precisely this contrast that makes the combination equally appealing in contemporary and classically inspired interiors. Farrow Ball colours – considered down to the finest detail The Farrow Ball colour palette is known for its distinctive and carefully balanced shades. From understated neutrals and natural tones to nuanced greens and blues, as well as rich, dark colours, it offers numerous possibilities for individual interior schemes. The YORK front plate can be produced in a Farrow Ball colour of your choice. This means the colour concept does not have to end at the wall: the light switch itself can echo the selected shade and become an intentional part of the room’s overall colour scheme. If the same shade is chosen for both the wall and the front plate, the switch visually recedes into the background. Alternatively, a second Farrow Ball colour can be used to create a deliberate contrast or to pick up a shade from furniture, fitted cabinetry or other design elements. Bronze Antique – applied by hand and unique to every toggle The solid metal toggles in Bronze Antique are deliberately different from uniformly industrially coated metal surfaces. Their distinctive appearance is created through an elaborate antiquing process carried out by hand using traditional techniques. This gives the surface its characteristic depth and individual markings. Subtle variations in colour and texture are part of the handcrafted finish and make every toggle unique. Bronze Antique works particularly well with warm, earthy and muted Farrow Ball shades. Combined with beige, cream, brown, red or warm green tones, it creates a calm and inviting interplay of colour and material. Equally striking is the deliberate contrast with cool blues, greys or dark greens. Here, the warm bronze introduces a clearly visible metallic accent and adds further depth to the colour combination. Existing details in bronze, patinated metal, dark brass or other warm metal finishes can also be echoed throughout the interior. Farrow Ball colour hand-painted behind the transparent front The colour of the YORK front plate is not applied to its visible surface. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the selected Farrow Ball shade in the ROHDE+ROHDE light switch studio. The colour is then viewed through the transparent front. This reverse-painting technique creates a distinctive optical depth and gives the colour a brilliant, glass-like appearance. A shade that may appear relatively matt on a painted wall develops its own visual character on the YORK front. At the same time, the actual paint layer remains protected behind the transparent surface and is not exposed to direct contact during everyday use. In this way, YORK combines individual colour design with a surface whose appearance differs noticeably from that of a conventionally painted plastic cover. Illuminated Bronze Antique toggle The Bronze Antique toggle can optionally be fitted with a subtle point of light. Depending on the electrical wiring, the supplied 230 V LED insert can be used, for example, as an orientation light, an indicator light or a permanently visible design feature. The small point of light creates a particularly precise accent against darker Farrow Ball colours. On lighter front plates, the illumination appears more understated. The interplay of individual colour, hand-finished bronze and light gives the switch a distinctive appearance even in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material combines the refined appearance of a transparent glass surface with the durability required for a light switch used every day. It is eleven times more impact-resistant than conventional glass, making it considerably more resistant to mechanical stress. An integrated UV filter also helps to protect the colour finish behind the glass against long-term changes caused by exposure to light. Because the paint layer is located on the reverse of the transparent front, it also remains protected from direct contact. Colour and bronze as part of the interior design With a YORK front plate individually produced in a Farrow Ball colour, the light switch itself becomes a considered part of the room’s colour and material concept. For a particularly calm appearance, the front plate can be finished in the same shade as the wall. The coloured surface then visually recedes, while the Bronze Antique toggles remain visible as warm metallic details. For a stronger accent, a second Farrow Ball colour can be chosen deliberately. This makes it possible, for example, to repeat a shade found in furniture, doors, fitted cabinetry or other areas of the room. The hand-antiqued bronze creates a surface that is intentionally not completely uniform. This individual character forms an interesting counterpoint to the clean geometry and smooth glass effect of the YORK front. In addition to Farrow Ball, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in a bespoke Farrow Ball colour with Bronze Antique Front plate individually reverse-painted in the chosen Farrow Ball colour Ideal for coordinating with walls and interior schemes using Farrow Ball colours Reverse-painted by hand in the ROHDE+ROHDE light switch studio Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggles in Bronze Antique Elaborate antiquing carried out by hand using traditional techniques Every Bronze Antique toggle has its own individual surface character Toggles can optionally be illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter for long-term protection of the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plate can be replaced separately at a later date Installation of YORK toggle light switches YORK is suitable both for individual light switches and for combinations of multiple switches and sockets. In multiple installations, several wall boxes can be combined beneath a single continuous front plate. The arrangement can be horizontal or vertical. Where several wall boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. Wall boxes with a minimum depth of 45 mm are required for installation. The switch mechanisms are screwed directly into the wall boxes to ensure secure mounting. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected Farrow Ball colour Switch mechanism with high-quality Bronze Antique toggle in the required quantity LED insert for optional illumination of the toggles in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions A new wall colour? The front plate can be replaced separately With YORK, the visible front plate and the permanently installed switch mechanism are structurally separate. If the room is redesigned at a later date or painted in a different Farrow Ball colour, there is therefore no need to replace the complete light switch. A new YORK front plate in the desired Farrow Ball colour can be ordered separately and used to replace the existing front. The switch mechanism, Bronze Antique toggles, wiring and electrical installation can remain unchanged in the wall. As replacing the front plate alone does not involve any work on the electrical installation, an electrician is not required.
Light switch in Farrow Ball colour 2 toggles Bronze Antique illuminated. Glass-effect. YORK
Illuminated designer light switch. With a hand-antiqued Bronze Antique toggle and an individually selected Farrow Ball colour. From the YORK collection by ROHDE+ROHDE. The frameless front plate is made to order and individually reverse-painted in the chosen Farrow Ball shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry and other elements of an individually designed interior. The combination of a bespoke Farrow Ball colour, brilliant glass effect and antiqued bronze toggle gives this YORK version a distinctive character of its own. While the clean, frameless front has a modern, minimalist appearance, the hand-finished bronze introduces a warm and subtly varied metal surface. It is precisely this contrast that makes the combination equally appealing in contemporary and classically inspired interiors. Farrow Ball colours – considered down to the finest detail The Farrow Ball colour palette is known for its distinctive and carefully balanced shades. From understated neutrals and natural tones to nuanced greens and blues, as well as rich, dark colours, it offers numerous possibilities for individual interior schemes. The YORK front plate can be produced in a Farrow Ball colour of your choice. This means the colour concept does not have to end at the wall: the light switch itself can echo the selected shade and become an intentional part of the room’s overall colour scheme. If the same shade is chosen for both the wall and the front plate, the switch visually recedes into the background. Alternatively, a second Farrow Ball colour can be used to create a deliberate contrast or to pick up a shade from furniture, fitted cabinetry or other design elements. Bronze Antique – applied by hand and unique to every toggle The solid metal toggles in Bronze Antique are deliberately different from uniformly industrially coated metal surfaces. Their distinctive appearance is created through an elaborate antiquing process carried out by hand using traditional techniques. This gives the surface its characteristic depth and individual markings. Subtle variations in colour and texture are part of the handcrafted finish and make every toggle unique. Bronze Antique works particularly well with warm, earthy and muted Farrow Ball shades. Combined with beige, cream, brown, red or warm green tones, it creates a calm and inviting interplay of colour and material. Equally striking is the deliberate contrast with cool blues, greys or dark greens. Here, the warm bronze introduces a clearly visible metallic accent and adds further depth to the colour combination. Existing details in bronze, patinated metal, dark brass or other warm metal finishes can also be echoed throughout the interior. Farrow Ball colour hand-painted behind the transparent front The colour of the YORK front plate is not applied to its visible surface. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the selected Farrow Ball shade in the ROHDE+ROHDE light switch studio. The colour is then viewed through the transparent front. This reverse-painting technique creates a distinctive optical depth and gives the colour a brilliant, glass-like appearance. A shade that may appear relatively matt on a painted wall develops its own visual character on the YORK front. At the same time, the actual paint layer remains protected behind the transparent surface and is not exposed to direct contact during everyday use. In this way, YORK combines individual colour design with a surface whose appearance differs noticeably from that of a conventionally painted plastic cover. Illuminated Bronze Antique toggle The Bronze Antique toggle can optionally be fitted with a subtle point of light. Depending on the electrical wiring, the supplied 230 V LED insert can be used, for example, as an orientation light, an indicator light or a permanently visible design feature. The small point of light creates a particularly precise accent against darker Farrow Ball colours. On lighter front plates, the illumination appears more understated. The interplay of individual colour, hand-finished bronze and light gives the switch a distinctive appearance even in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material combines the refined appearance of a transparent glass surface with the durability required for a light switch used every day. It is eleven times more impact-resistant than conventional glass, making it considerably more resistant to mechanical stress. An integrated UV filter also helps to protect the colour finish behind the glass against long-term changes caused by exposure to light. Because the paint layer is located on the reverse of the transparent front, it also remains protected from direct contact. Colour and bronze as part of the interior design With a YORK front plate individually produced in a Farrow Ball colour, the light switch itself becomes a considered part of the room’s colour and material concept. For a particularly calm appearance, the front plate can be finished in the same shade as the wall. The coloured surface then visually recedes, while the Bronze Antique toggles remain visible as warm metallic details. For a stronger accent, a second Farrow Ball colour can be chosen deliberately. This makes it possible, for example, to repeat a shade found in furniture, doors, fitted cabinetry or other areas of the room. The hand-antiqued bronze creates a surface that is intentionally not completely uniform. This individual character forms an interesting counterpoint to the clean geometry and smooth glass effect of the YORK front. In addition to Farrow Ball, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in a bespoke Farrow Ball colour with Bronze Antique Front plate individually reverse-painted in the chosen Farrow Ball colour Ideal for coordinating with walls and interior schemes using Farrow Ball colours Reverse-painted by hand in the ROHDE+ROHDE light switch studio Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggles in Bronze Antique Elaborate antiquing carried out by hand using traditional techniques Every Bronze Antique toggle has its own individual surface character Toggles can optionally be illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter for long-term protection of the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plate can be replaced separately at a later date Installation of YORK toggle light switches YORK is suitable both for individual light switches and for combinations of multiple switches and sockets. In multiple installations, several wall boxes can be combined beneath a single continuous front plate. The arrangement can be horizontal or vertical. Where several wall boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. Wall boxes with a minimum depth of 45 mm are required for installation. The switch mechanisms are screwed directly into the wall boxes to ensure secure mounting. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected Farrow Ball colour Switch mechanism with high-quality Bronze Antique toggle in the required quantity LED insert for optional illumination of the toggles in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions A new wall colour? The front plate can be replaced separately With YORK, the visible front plate and the permanently installed switch mechanism are structurally separate. If the room is redesigned at a later date or painted in a different Farrow Ball colour, there is therefore no need to replace the complete light switch. A new YORK front plate in the desired Farrow Ball colour can be ordered separately and used to replace the existing front. The switch mechanism, Bronze Antique toggles, wiring and electrical installation can remain unchanged in the wall. As replacing the front plate alone does not involve any work on the electrical installation, an electrician is not required.
Light switch in Farrow Ball colour 1 toggle Bronze Antique illuminated and 1 socket. Glass-effect. YORK
Illuminated designer light switch. With a hand-antiqued Bronze Antique toggle and an individually selected Farrow Ball colour. From the YORK collection by ROHDE+ROHDE. The frameless front plate is made to order and individually reverse-painted in the chosen Farrow Ball shade. This allows the light switch to be precisely coordinated with wall colours, furniture, fitted cabinetry and other elements of an individually designed interior. The combination of a bespoke Farrow Ball colour, brilliant glass effect and antiqued bronze toggle gives this YORK version a distinctive character of its own. While the clean, frameless front has a modern, minimalist appearance, the hand-finished bronze introduces a warm and subtly varied metal surface. It is precisely this contrast that makes the combination equally appealing in contemporary and classically inspired interiors. Farrow Ball colours – considered down to the finest detail The Farrow Ball colour palette is known for its distinctive and carefully balanced shades. From understated neutrals and natural tones to nuanced greens and blues, as well as rich, dark colours, it offers numerous possibilities for individual interior schemes. The YORK front plate can be produced in a Farrow Ball colour of your choice. This means the colour concept does not have to end at the wall: the light switch itself can echo the selected shade and become an intentional part of the room’s overall colour scheme. If the same shade is chosen for both the wall and the front plate, the switch visually recedes into the background. Alternatively, a second Farrow Ball colour can be used to create a deliberate contrast or to pick up a shade from furniture, fitted cabinetry or other design elements. Bronze Antique – applied by hand and unique to every toggle The solid metal toggles in Bronze Antique are deliberately different from uniformly industrially coated metal surfaces. Their distinctive appearance is created through an elaborate antiquing process carried out by hand using traditional techniques. This gives the surface its characteristic depth and individual markings. Subtle variations in colour and texture are part of the handcrafted finish and make every toggle unique. Bronze Antique works particularly well with warm, earthy and muted Farrow Ball shades. Combined with beige, cream, brown, red or warm green tones, it creates a calm and inviting interplay of colour and material. Equally striking is the deliberate contrast with cool blues, greys or dark greens. Here, the warm bronze introduces a clearly visible metallic accent and adds further depth to the colour combination. Existing details in bronze, patinated metal, dark brass or other warm metal finishes can also be echoed throughout the interior. Farrow Ball colour hand-painted behind the transparent front The colour of the YORK front plate is not applied to its visible surface. Instead, the reverse of the crystal-clear acrylic glass is hand-painted in the selected Farrow Ball shade in the ROHDE+ROHDE light switch studio. The colour is then viewed through the transparent front. This reverse-painting technique creates a distinctive optical depth and gives the colour a brilliant, glass-like appearance. A shade that may appear relatively matt on a painted wall develops its own visual character on the YORK front. At the same time, the actual paint layer remains protected behind the transparent surface and is not exposed to direct contact during everyday use. In this way, YORK combines individual colour design with a surface whose appearance differs noticeably from that of a conventionally painted plastic cover. Illuminated Bronze Antique toggle The Bronze Antique toggle can optionally be fitted with a subtle point of light. Depending on the electrical wiring, the supplied 230 V LED insert can be used, for example, as an orientation light, an indicator light or a permanently visible design feature. The small point of light creates a particularly precise accent against darker Farrow Ball colours. On lighter front plates, the illumination appears more understated. The interplay of individual colour, hand-finished bronze and light gives the switch a distinctive appearance even in the dark. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface for everyday use For its YORK front plates, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material combines the refined appearance of a transparent glass surface with the durability required for a light switch used every day. It is eleven times more impact-resistant than conventional glass, making it considerably more resistant to mechanical stress. An integrated UV filter also helps to protect the colour finish behind the glass against long-term changes caused by exposure to light. Because the paint layer is located on the reverse of the transparent front, it also remains protected from direct contact. Colour and bronze as part of the interior design With a YORK front plate individually produced in a Farrow Ball colour, the light switch itself becomes a considered part of the room’s colour and material concept. For a particularly calm appearance, the front plate can be finished in the same shade as the wall. The coloured surface then visually recedes, while the Bronze Antique toggles remain visible as warm metallic details. For a stronger accent, a second Farrow Ball colour can be chosen deliberately. This makes it possible, for example, to repeat a shade found in furniture, doors, fitted cabinetry or other areas of the room. The hand-antiqued bronze creates a surface that is intentionally not completely uniform. This individual character forms an interesting counterpoint to the clean geometry and smooth glass effect of the YORK front. In addition to Farrow Ball, the YORK collection is available in numerous other colour systems and colour collections. Advantages of YORK in a bespoke Farrow Ball colour with Bronze Antique Front plate individually reverse-painted in the chosen Farrow Ball colour Ideal for coordinating with walls and interior schemes using Farrow Ball colours Reverse-painted by hand in the ROHDE+ROHDE light switch studio Brilliant colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggles in Bronze Antique Elaborate antiquing carried out by hand using traditional techniques Every Bronze Antique toggle has its own individual surface character Toggles can optionally be illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter for long-term protection of the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plate can be replaced separately at a later date Installation of YORK toggle light switches YORK is suitable both for individual light switches and for combinations of multiple switches and sockets. In multiple installations, several wall boxes can be combined beneath a single continuous front plate. The arrangement can be horizontal or vertical. Where several wall boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. Wall boxes with a minimum depth of 45 mm are required for installation. The switch mechanisms are screwed directly into the wall boxes to ensure secure mounting. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted in the selected Farrow Ball colour Switch mechanism with high-quality Bronze Antique toggle in the required quantity LED insert for optional illumination of the toggles in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions A new wall colour? The front plate can be replaced separately With YORK, the visible front plate and the permanently installed switch mechanism are structurally separate. If the room is redesigned at a later date or painted in a different Farrow Ball colour, there is therefore no need to replace the complete light switch. A new YORK front plate in the desired Farrow Ball colour can be ordered separately and used to replace the existing front. The switch mechanism, Bronze Antique toggles, wiring and electrical installation can remain unchanged in the wall. As replacing the front plate alone does not involve any work on the electrical installation, an electrician is not required.